Tel:(+61) 2 4229 6808
Tel: (+61) 2 4244 3193
Mob: (+61) 435 428 482
HomeProducts
ET15D-Dimmable-Driver
Loading...

ET15D-Dimmable-Driver

 

 

1. Product name
· LUMOS ET15D LED DRIVER (DIMMABLE)
 
2. Product description and application
· Constant current Dimmable LED driver for use on LED lamps, LED wall washer, in-ground uplighters and more.
 
3. Electrical characteristics
· Class II Power Supply
· Input voltage : 220-240V AC 50/60Hz
· Rated input current : 0.09A
· Output Power : 10w min, 15w max.
· Output Voltage :

Diver Model Min Load Voltage Max Load Voltage
ET15D-350mA 27V 43V

  (Note : Other drive current configurations are available. Please ask for specs from manufacturer) 
 
· Suitable for use with Leading and Trailing edge dimmers
(slight flickering may occur at low ranges, dependent upon dimmer brand used) .
 
4. Temperature 
· Ambient temperature : ta = Min -10oC, Max 40oC
· Case temperature Max tc = 80oC
 
5. Protection 
· Open circuit protection
· Secondary side short circuit protection
· Thermal overload protection
 
6. Standards
· IEC 61347-2-13 Ed 1.0
· AS/NZS 61347.1:2002
 
7. Physical characteristics 
· Product size: 119mmX48mmX33mm
· Protection grading : IP20
· Anti electric shock : Second grade
· Output wire length : 2m max with 0.5mm2 wire
 
8. Storage conditions
· Humidity: 5 % up to max. 85 %, not condensed (max. 56 days/year at 85 %)
· Storage temperature: -40 °C up to max. +80 °C
· The devices have to be within the specified temperature range (ta) before they can be operated.
 
9. Safety warnings
· Always read the instructions fully before installation & use; ensure the suitability of product to intended application; retain this document for future reference. If in doubt, contact the point of purchase for clarification before beginning installation.
· This product must be installed by a licensed electrician in accordance with current version of AS/NZS 3000 Wiring Rules.
· Not suitable for use near flammable liquids, vapors, gases or in explosive environments.
· Allow minimum distance of 50mm clearance from materials with insulating properties.
· Under no circumstances is the driver to be covered with materials with insulating or flammable properties.
· Regularly inspect the LED Driver and Lamp for any damage. If found defective in any way immediately cease use and return the light fitting to the point where it was purchased.
· There are no user maintainable components in this product.
· Do not attempt to modify this product in any way from the condition 'as supplied '.